Cross-country ski markings. Fischer skis: models, reviews. Amateur and tourist options

Hans HUBINGER:

THE SAME SKI CAN FIT A STRONG 70KG SKIER WITH GOOD TECHNIQUE

AND GOOD PHYSICAL DATA, AND A 90-KIG MAN WITH OVERWEIGHT AND MEDIOCRE TECHNIQUE.

AT THIS WAY, FOR BOTH THE FIRST AND THE SECOND, THIS WILL BE CLOSE TO THE IDEAL SKI.

HOW TO SEW THIS INFORMATION INTO A LABEL?

I visited the Fischer factory in Ried twice before this trip - in 1998 (see L.S. No. 10) and in 2006 (see L.S. No. 35). Each time we managed to bring back a lot of materials from these trips, and each time we managed to publish all these materials in one issue. This trip will be an exception, because we will not be able to publish everything that we managed to bring from Reed this summer in one issue. Therefore, we are publishing a smaller, but most relevant part now, in this issue, and you can get acquainted with the larger part in the next, January issue, already in 2014.


This year, Fischer announced a new top-of-the-line Speedmax model, which is manufactured using the revolutionary new Cold Base Bonding technology. Naturally, I was interested in the opportunity to see for myself how this model is produced.

Let me remind you in a nutshell what is the traditional procedure for manufacturing any Fischer ski model (and not only Fischer): assembled in a special cassette, all the components of the future ski go into a press, where they are sintered/glued under high temperature and pressure, and a completely finished ski comes out of the press - after the oven it only has to undergo “cosmetic procedures” in the form of trimming, sanding and applying varnish. This technology has been developed not even for years, but for decades, and nothing fundamentally new has been introduced into it in recent years.

And now - Speedmax. A revolution, a breakthrough, a fundamentally new technological process, the essence of which is that the ski is assembled/glued/sintered in a press under the same high temperature and pressure, but... without a plastic sliding surface! And the plastic of the sliding surface is then cold glued to the finished ski. Thus, the plastic of the sliding surface is not exposed to high temperatures and pressure and, according to Fischer representatives, better retains its original properties: it absorbs lubricant better, is processed better, glides better...

Interesting? And how! But where, where is the very area where this magic happens? Alas, in the workshop where the “marriage” takes place (From the author: let me use this term from the world of automobile assembly, where this is the name for the procedure for connecting a body and an engine on a conveyor), that is, the connection of an absolutely finished ski with the plastic of the sliding surface, we were not allowed. They say: secrets, no way for journalists to go there. But they showed us a completely finished, absolutely weightless Speedmax ski without a sliding surface. Here it is - in the hands of Fischer representative in Russia Elena Rodina (see top photo on page 82). When you hold this ski in your hands, it is very difficult to get rid of the feeling that all this is some kind of fantasy: you are holding in your hands what seems to be an almost finished ski, but it weighs nothing. It is clear that when the plastic of the sliding surface is glued to it, it will become heavier and become quite familiar in weight. But this feeling - when you hold in your hands an as yet “unshod” ski of the weight of a feather - is indescribable.

All female workers at the factory are dressed in branded Fischer workwear - comfortable and beautiful.
photo: Ivan Isaev

So, our interlocutor today is Hans Hubinger, head of the racing ski development department at Fischer. It was with him that we talked seven years ago (“L.S.” No. 35 for 2006), it was him who I asked seven years ago numerous questions about why the Fischer company is a leader in the market, and how it manages to maintain this leadership for so many years. Since then, to be honest, little has changed on the market, or rather, Fischer’s leadership has become even more noticeable, but we will talk about this in detail in the January issue of the magazine, but for now I ask Hans to answer our questions and the questions of our readers, given on the website before our trip to the factory in August 2013.

We spent one night “while passing through” in Salzburg, and in the morning we went out into the city for a run. That's when I took a photo of this now, in August, empty bike rack in front of the local college building. They say that during the school semester it is not so easy to find a free place for a bicycle.
photo: Ivan Isaev

While we were walking through the factory to the meeting room, we were discussing the issues of ski testing, so the first question to Hans Hubinger (by the way, from Elena Rodina) after I turned on the recorder turned out to be a continuation of our “corridor” dialogue:

- Why do Norwegians test skis so much on glaciers in the fall - does this really make any sense?

In principle, all our athletes receive skis in the fall. They test them in September and October on glaciers, as well as at the first stages of the World Cup, and if something is wrong, some skis don’t fit, we then change those skis for them. At the same time, we try to take into account many of the individual needs of racers: for example, an athlete has good technique and physical strength and can cope with grip even with a short block - we select hard skis for him. At the same time, he, being able to cope with such a short block, naturally begins to win in sliding. And someone needs a longer, softer last, more forgiving of technical flaws, and we try to select or make such skis for the racer - we meet such wishes. That is, we can make some individual changes to the design at the request of the riders. But this only applies to world elite racers; we cannot do this for every athlete.

In addition, if we return to the question of the advisability of autumn tests on a glacier... You see, for us it is not even so important to test skis on this autumn snow, as it is important to communicate with athletes in a calm, relaxed atmosphere, to be close to them, to collect their impressions from last season, see in which direction to go next. Because it’s one thing to communicate with them during the World Cup, World Championships and Olympics, and quite another thing on the glacier, when the season has not yet begun and no one is in a hurry.

Another thing that surprised me in Salzburg is the combined crossings/crossings across the street for pedestrians/cyclists. There are so many cyclists on the streets of Salzburg that together with pedestrians on the same zebra crossing it would be crowded for them, and separate corridors are allocated for them at all crossings.
photo: Ivan Isaev

After Hans answered the “zero” question from Elena Rodina, we took out a printout with questions from the news announcement on the website dated August 13, 2013 and explained to Hans that these were questions from our readers.

Well, let's see what interests Russian skiers.

So I ask Hans the first question:

Andrey Gruzdev:

Where can I make a grinding of P5-1 and C12-1? What kind of pitch on shop skis (name or code)?

We mainly use P5-1 and C1-1, including on production skis. And we apply these structures to “shop” skis because in World Cup races, elite athletes mainly use these structures. Of course, we have many special structures for narrower temperature ranges (for example, the C-12-1 mentioned by your reader), but nevertheless, it is the P5-1 and C1-1 that are most often used at the World Cup stages.

Malex:

I agree with the question below - where can you create (or update) Fisher structures?

I can tell you a “secret”: we realized that even within the company we cannot transfer into mass production the structures that we use in experimental production. It is impossible to reproduce the same metal grinder on two different machines. It is necessary not only to take into account certain technical parameters of this grinding stone, but you must also have the same stone, the same diamond, the same water used for washing. Racers and dealers often come to us with requests to reproduce this or that grind, but we always explain to everyone that it is literally impossible to reproduce the same pattern on two different cars. And then, let's not forget that this is still partly our know-how. That is, you need to understand that real Fischer structures can only be made at the Fischer factory, and at the moment this opportunity is available only to members of national teams competing at the World Cup stages.

Malex:

Can you tell us about the Fischer structures? The description that I came across on the Internet looks uninformative. Why did they change the standard (store) plus structure? It seems to me that she was very good. If you compare the new one with the old one, which one has what advantages?

The new P5-1 structure is more universal - the range of its use is shifted even more towards the plus side. At the same time, the old plus structure P1-1 continues to be successfully used by our racing department. But we noticed that in warm weather the P1-1 still has some kind of suction effect. And since we use only two types of skis in mass production - cold and warm - we would like these two types to cover the widest possible temperature range.

Andrey Pshenichnikov:

Tell us about the further development of the RCS Classic Zero line (in my area it is especially relevant).

- I’ll add on my own behalf to Andrey’s question: I heard that the range of use of Zero skis is now significantly expanding. How true is this?

Yes it's true. When we started working on the Zero skis in the late 1980s, we may have made a slight mistake because we wanted to use them as a replacement for the Crown notched skis, a ski that was quite versatile and could be used in a relatively wide range of applications. range. But it turned out that, being indispensable in the near-zero zone, Zero skis still have a significantly narrower range of use. We looked at the statistics and saw that athletes use these skis extremely rarely - once, maybe twice a season, so rarely did the snow and temperature conditions suit them.

We began to think - how to expand the range of their application? The fact is that when using this model there is one danger: it occurs when there is high humidity, the temperature is about zero degrees, but at the same time in the shaded areas of the route it is slightly below zero. Under such conditions, there is always a possibility of freezing of the water that is on the surface of the ski and directly in the fibers. We began to think - what can be done in this situation? They began to look for other, more suitable materials for this purpose for the block area. In addition, we turned to representatives of lubricant manufacturing companies with a request to find lubricant options for Zero skis under the block: we needed an ointment that would prevent moisture from penetrating into the space between the fibers and would prevent water there from turning into ice. And ointment manufacturing companies responded, such lubricants appeared, and the possibility of using them helped us expand the range of application of these skis towards a slight minus. On the other hand, tests have shown that in warmer, above-zero weather, when klisters are typically used, these skis can also be used instead of traditional wax skis. That is, as you can see, these skis turned out to be possible to use in positive weather.

Marit Bjorgen is one of the most successful sports “projects” of the Fischer company. Perhaps only the legendary eight-time Olympic champion Bjorn Daly was more successful. Since the last World Championships in Val di Fiemme in 2013, Marit has brought four gold and one silver medal (out of a possible six) for Fischer and Norway.
photo: Reuters

Another important circumstance was the fact that we now began to use two different materials for the pad - more aggressive in the middle of the pad, and less aggressive at the edges. Now that you have determined the last on a specific pair of skis for a specific rider with his weight, you can fix the last you need on these skis by waxing the “extra” pieces of it, consisting of non-aggressive plastic. On the other hand, in case of unsteady grip, these “extra” areas of non-aggressive plastic under the block can be sanded and used for holding rather than sliding.

- Are Zero skis harder or softer than standard skis?

Softer. Regular skis need to be stiffer, because you also need room for several layers of wax. But there is no ointment here.

- Still, I would like to hear some specific information: what is the current current temperature range for using these skis - plus or minus half a degree, one degree, two degrees?

At high humidity (and therefore a low probability of ice formation), these skis can be used at fairly low temperatures, down to minus three and even minus five degrees. For example, at the 2011 World Championships in Oslo, where the sea is close and there is always high humidity and fog, these skis worked even at minus three to five degrees.

In low humidity and sub-zero temperatures you are less likely to use these skis.

If we try to give a universal recipe for using Zero skis, it would be as follows:

at sub-zero temperatures, these skis can be used down to minus three to five degrees, provided there is high humidity. When the humidity is low, your chances of using these skis are greatly reduced due to the high likelihood of ice forming under the pad. True, modern pad treatment products from leading lubricant manufacturers will help you reduce the severity of this problem;

in the near-zero zone at a temperature of plus/minus half a degree, these skis are ideal, and it is not so easy for them to find an alternative;

at above-zero temperatures, the probability of ice formation between the fibers becomes negligible, and in this sense, using these skis at a temperature of plus one, two, or three degrees seems ideal. Except for one “but”: the warmer it is, the more moisture appears in the ski track, the more suction the villi create. If you exercise, this will not be a problem for you. But in a race, this suction can play a negative role - you will lose to your competitors in gliding, and if the ski track is frankly damp, you will still need to look for an alternative to Zero skis in the form of skis with lubricant.

On the streets of Salzburg we came across a “floating” silver statue, with which passers-by threw coins into buckets; after that, the statue “came to life” and presented the donor with a memorial card with his image.
photo: Ivan Isaev

Bicycle parking in Salzburg is literally at every step.
photo: Ivan Isaev

- How far from zero to plus can you use these skis?

Temperature doesn't really matter much - we know conditions where these skis definitely won't perform at any temperature - on a hard, icy piste. Because the microvilli of the pad do not have the slightest chance of clinging to such a hard snow cover, almost ice. But fresh or, especially, falling snow at near-zero temperatures gives Zero skis a very good chance, since the use of liquid or semi-solid ointment in such weather is very likely to provide you with a stick.

Andrey Chernyshev:

Does plastic differ in its technical parameters on RCS and RS skis (carbon and non-carbon)?

- Let's add Speedmax skis to the list voiced by Andrey.

Initially, the sliding surface on all these types of skis is the same. True, Speedmax is a different story; their sliding surface is not exposed to high temperature and high pressure during the production process, and we consider this a significant advantage. But initially the material on Speedmax is the same.

In fact, modern trends in preparing skis for a race are such that the plastic of the sliding surface itself is no longer as important as it used to be. The structure applied to this plastic is much more important. Yes, the 11th base was not bad, it showed very good results on cold fresh snow, but, nevertheless, A5, in our opinion, works better. But, again, if you apply the wrong structure to any cold base, then there is no chance that such skis will work well. The 11th base worked well when a variety of hand knurling was common. But now the system of machine processing of skis has gone far ahead. We still let athletes try 11-base skis every year, but they don't use them.

Andrey Chernyshev:

How to distinguish skis made in Austria from Ukrainian or Belarusian or some other?

What prompted this question? Does it matter?

- In Russia, when people buy top models of skis, they want to be sure that these skis are made in Austria and not in Ukraine.

In principle, this is also a rather important story for us. The owners of the company have a long-standing principled position on this matter: all high-quality products, all top models, should be produced here in Austria. Currently, six top models are produced in Reed: Speedmax, Carbonlite, RCS, RCR, SCS and the junior Carbonlite Jr. model.

- How can you understand this by looking at the ski itself? Is there some kind of distinctive inscription, or perhaps part of the individual ski number?

Austrian skis say “Made in Austria”. On Ukrainian skis it is written “Austria” - it’s easy to distinguish.

The procedure for placing components in a cassette before sending the future ski to the press has remained unchanged for several decades...
photo: Fischer press service

But the high-precision, fully computerized press is new, it is only two years old. It allows you to set the technical parameters of skis with maximum accuracy and subsequently makes it possible to reproduce the characteristics of the most successful skis.
Now two fully assembled cassettes went inside the press.
photo: Fischer press service

Vladimir Smirnov:

I'm also interested in the markings (base, design, FA, HR, SVZ)...

Osipov Vladimir:

And I would join the question regarding stiffness designations and note the discrepancy between the FA calculations and the actual stiffness and measurements of skis on the “flexor”. There are some tables of “rigidity” circulating around Russia... in my opinion, amateur ones. For some time now, SOFT skating skis have not been supplied to Russia, at least it is difficult to find them, which is why athletes of small weights, especially tall young people with a small mass - young men, juniors, are missing out. This problem exists even in the country's national teams. A. Zavyalov’s explanations look unconvincing and are more like an attempt to justify the excessive rigidity of Fischer skate skis to the sports “market”.

We are saying that when selecting skis it is really very important to take into account a large number of parameters. On the one hand, in our tables we primarily rely on a person’s weight; on the other hand, there are many other parameters, for example, height - with the same weight you can use skis of different sizes. There are different levels of skiing - everyone knows that a person with good technique can, all other things being equal, take stiffer classic skis - they will roll better, and his good technique and good physical data will allow him to push normally on stiffer skis. And another athlete, all other things being equal, will not be able to cope with these skis. The FA stiffness selection table, which actually exists and can actually be found on the Internet, is just a general direction; you need to take into account many other parameters in the selection of skis, in addition to this FA. Therefore, for each weight there is a certain range of the stiffness index; this is not a specific unit with a spread of one or two points, but a fairly wide range with a spread of ten units.

- Can I ask a stupid question? Why is it still impossible to write stiffness on skis in kilograms, and not in these tricky FA?

We discussed this issue for a long time - writing kilograms or FA. But as we said, if a person comes to the store and sees kilograms on a ski that do not match his weight, he will not buy them. But in fact, depending on your skiing technique, these parameters may change - with good technique, you can and should take stiffer skis with more weight. And vice versa. In our opinion, for a person who understands the subject, the technical parameters (FA and HR) will give more information about the skis than just the weight in kilograms. The seller must know the technical characteristics of this ski and must be able to, in a conversation with the buyer, depending on his level of training and physical data, give him a recommendation on deviation in one direction or another.

- Okay, then tell me, what is FA anyway?

Hans takes a piece of paper and begins to draw.

Look, this is the balance of the ski, this is the point of application of force 7 centimeters from the balance point.

- Why 7 cm? ?

We consider that the rider applies maximum force to the ski at the ball of the foot, which is approximately 7 cm from the balance point.

So, the binding is at the balance point, but we apply pressure not at the balance point, but where the balls of the foot are located. We increase the pressure until the gap between the surface of the stand and the ski is 0.2 mm (the thickness of the ointment). Let's see how much weight needs to be applied to the ski to get this gap of 0.2 mm? For example, on a classic ski with a length of 207 cm, we need to apply a force of 42-43 kg so that there is a gap of 0.2 mm under the block. This is the FA value. Because in order to completely crush this ski, to select this gap of 0.2 mm, this particular ski needs to be given an additional load of another 5-6 kg above these 42-43. Now is it clear how FA differs from the weight required to completely crush the ski?

There are two more parameters that are written on racing skis: HR - stiffness, and SVZ.

HR is a weight fixed for each size with which we apply pressure to the ski during testing. For example, for a height of 207 cm, our fixed weight is 32.5 kg. That is, we influence each size with our own separate weight, but inside the size, the weight with which all skis are affected is the same. Ideally, of course, I would like to take the weight of each individual person and, with half of his weight, influence the ski he selects. But it is clear that you cannot bring every buyer to Austria, so when selecting skis in the racing department, we use these two parameters - FA and HR, since this allows us to select skis more accurately.

- That is, HR is the amount of residual deflection after the ski is exposed to a standard weight fixed for this size?

Absolutely right. FA is the maximum load up to a clearance of 0.2 millimeters, measured in kilograms, and HR is the residual deflection after applying the standard weight for this size to the ski, measured in millimeters. At FA we measure the pressure (the weight with which we press on the ski), and when we receive HR we measure the remaining clearance.

I ask Hans to draw the weights that are applied to certain ski sizes. Hans draws these ranges in the upper left corner and explains:

The difference between sizes 207 cm and 202 cm is 2.5 kg. But between 202 and 197 the difference is no longer 2.5, but 5 kg. This is due to the fact that 202, as we believe, is usually still a men's ski, and 197 is already a women's ski.

- What is SVZ?

This is a characteristic that shows how much the ski deviates from the ideal straight line.

- And how is it measured - in millimeters, microns?

This is not so important - this is, in fact, our internal indicator of quality, which has nothing to do with the performance of the skis. This indicator helps us to reject low-quality skis, nothing more.

I tell Hans that we will publish his drawing in the magazine and ask him to sign it in the upper right corner. Everyone present laughs.

Do you want to make Picasso out of me? - Hans grumbles with a smile, but still signs the drawing.

Drawing by Hans. In the upper corner are the values ​​of fixed loads applied to certain ski sizes; on the right is a handwritten signature.

- Let's try to answer the question about Soft skis...

Here your reader is right - several years ago we stopped producing skate skis in Soft hardness, but nevertheless, Medium hardness has a certain range in which you can find both softer and harder skis. You also need to understand that usually when choosing skating skis, the buyer often goes in the direction of stiffer ones, because it is believed that such skis glide better.

But if we talk about classic skis, then the average consumer, on the contrary, often goes in the direction of softer skis in order to ensure a reliable grip. Maybe he will lose a little when using such skis in gliding, but in the classics, grip is still the most important thing, because it is this aspect, and not gliding, that ensures comfortable skiing with this style. In skating skiing, it is important that the ski is something like a springboard, a catapult, so that there is not full contact between the ski and the snow, but in classic skiing you definitely need full contact. Therefore, we retained the Soft stiffness in classic skis, abandoning it in skate skis.

- A question a little aside: what, in your opinion, is most important in the sliding of a ski: the deflection (diagram) of the ski, the structure of the ski or lubrication? 15 years ago, the first Russian world champion in ski orienteering, Ivan Kuzmin, wrote on the pages of our magazine: “... it is generally accepted that the weight deflection of a ski determines 60% of the sliding properties of the ski, 20% is determined by the material and structure, and only the last 20% is determined by lubrication skis..." To what extent, in your opinion, does this proportion correspond to reality? ?

Gliding isn't everything. If you just slide down a hill at speed, then that’s one thing. If we are talking about the work of skis, then this is completely different. For gliding, I can take alpine skis and the main thing there is the structure and ointment, the diagram of the ski fades into the background. And in order to move not only down, but also up, alpine skiing is not suitable for me, I need cross-country skiing, and there I need a completely different set of characteristics and working properties.

- And yet, this is important to us - how correct, in your opinion, is this statement?

This question is not easy to answer. If any of these three parameters does not work, then there will be no result in any case. That is, if you have chosen a good pair of skis for yourself, but have not guessed correctly with the structure or lubrication, you still will not get good skis; you will not have a chance in the fight against competitors. That is, in fact, I do not have a universal answer to your question. But, since you still insist on an answer, I can say that on the whole I like these numbers, the proportion you give is similar to the truth. Because I deal with these sixty percent, I also deal with these twenty percent, well, but these twenty percent (lubrication) are none of my business (laughs).

A completely finished Speedmax ski (but so far without a plastic sliding surface) in the hands of Fischer manager in Russia Elena Rodina. Believe me, this ski in this form is really lighter than a feather - absolutely weightless...
photo: Ivan Isaev

This is the NIS plate (its back side) that will soon be glued to the Fischer ski. As you can see, the plate has four spikes, which, when glued, will fit into four technological holes drilled in the ski with glue.
photo: Ivan Isaev

Reference skis, with the help of which the machine settings for pairing skis are checked from time to time. This machine was purchased by the factory five years ago, and since then the accuracy of pairing skis has increased quite noticeably - now skis with a weight difference of more than three kilograms cannot appear in one pair. But at Fischer they especially emphasized that mating with a spread of 3 kg is the most extreme case; they have no more than one such pair in a hundred. And the usual error during mating is no more than one or two kilograms.
photo: Ivan Isaev

What do you think is this glass box in front of the entrance to the workshop? Didn't you guess right? That's right, smoking room. Smokers cannot just stand and smoke on the territory of the factory (even on the street, outside the premises) - they are obliged to enter this glass “aquarium” and, after smoking, leave the cigarette butt there. I asked Fischer Racing Marketing Director Tanja Winterhalder how many people smoke in their factory? Tanya winced in response and, it seemed to me, answered a little guiltily:
- A lot, 10 or even 12 percent. But the process of parting with a cigarette is slowly but surely going on.
I thought and mentally asked myself - how many people smoke at some Russian enterprise in the outback? 40 percent? 50? 60? I think that this Austrian 10-12 percent for a purely provincial city in Austria is a very, very good indicator.
photo: Ivan Isaev

“Made in Austria” - this inscription is on all skis made in Austria. This is a sign of the Austrian origin of this product.
photo: Ivan Isaev

Walking past a garbage container, I saw an empty box of a 900-gram package of Swix paraffin. I asked - what is it? I was told that this particular paraffin is used for the basic treatment of Fischer skis. As you can see, this is “Swix” LF8 ointment for a temperature range of +1 – 4 degrees.
photo: Ivan Isaev

This is Max Buttinger's finger. He shows us the skid plastic used on six of Fischer's top ski models. True, out of caution, Max still covered up part of the identification code of the plastic (secrets, secrets everywhere!).
photo: Ivan Isaev

Maxim Churikov:

I have only one wish: to finally make clear the designation of skis by place of production, hardness, type of snow, structure, etc. So that anyone, taking skis in their hands, can immediately understand whether this pair is suitable for them or not? If it is difficult to print, then a program for reading and decoding the barcode should be freely available (on the Fischer website). It's the 21st century, and the shamanism around Fischer skis continues.

We have already discussed this. It is not enough to know two parameters in order to understand whether this ski is suitable for you or not, you need to take a lot of things into account, and it is quite difficult to “sew” this information into the label on the ski. The same ski can suit both a strong 70-kilogram skier with decent technique and good physical characteristics, and a 90-kilogram overweight person with mediocre technique. Moreover, for both the first and the second it will be a close to ideal ski. How can I put this information on the label? That is, we return again and again to the question that it is impossible to perceive a ski solely by its weight characteristics. If we need an ordinary ski for wide sale to unassuming buyers, then we can write on the ski a range of 70 - 75 kg, and go ahead - buy everyone who weighs in this range. But in order to select a ski better, more precisely, it is still better to write more difficult, but it will be of higher quality and more objective information.

Let's take our racing department as an example: there is more information on the skis on the label, and servicemen know from year to year which skis a particular athlete is using. But in any case, all other things being equal, they have to ski every time on a specific day in a specific place on a specific snow in a specific weather, and only tests on the snow can show which pair of skis works in this weather. We can't write all this on skis because no one knows. I have been working in the Fischer racing department for many years, thousands, if not tens of thousands of pairs of skis have passed through my hands, I can roughly say about this or that pair of skis whether it will work or not, but still you have to try every pair.

- Ok, question aside from the topic of indices and rigidities. “Fischer” and Sochi - is there any intrigue here, or is this the same routine event for you as Salt Lake City 2002, Turin 2006, Vancouver 2010? Are you preparing something special for Sochi?

We were already in Sochi during the pre-Olympic week, and we had some experience. But it all depends on what the conditions will be during the Olympic year. For example, during the pre-Olympic week in 2009, we thought we had found some solutions, but the following year the weather conditions completely changed. We were in Sochi for about two weeks, we tested and tried a lot of things, we have certain ideas about what we might need there, because we have repeatedly participated in competitions in similar conditions - at high temperatures and high humidity, typical for this place. Of course, we will bring a large number of skis that performed well last season. But, without a doubt, we will take to Sochi not only what we tested, we will take there everything we have, because no one knows what exactly will work next year - what bases, what structures? In my life I have done a lot of testing and research in the snow and came to the conclusion that it is impossible to predict anything, everything changes every time. It’s very good to have this experience, but relying on it alone still won’t work.

We talked

Elena RODINA and Ivan ISAEV,

Moscow - Reed - Moscow

You can learn a lot more about skis than is written in bright, big letters on their surface. The ability to read information on skis will help you choose the right skis in the store and not be deceived when buying already used skis. We will tell you everything about the numbers on Fischer skis in this article.

Serial number of Fischer skis: decoding

On the sidewall of Fischer skis in the area of ​​the heel of the mount there is a serial number that all amateur skiers want to decipher. There are even those who look for sacred meaning in these numbers. In fact, everything in the number is simple, just like in the number of any other product.

187/1450688580 031

  • 187 – ski length in cm
  • 14 – year of manufacture (2013)
  • 5 – hardness (4 – soft, 5 – medium, 6 – stiff)
  • 06 – serial number of the week of release from the beginning of the calendar year
  • 88580 – ski serial number
  • 031 – hardness index (FA).

Since 2016, the ski number has been of this type 191/1653513931 without hardness index. The size of top skate models has decreased by 1 cm, and the FA index is written on a sticker with a barcode. Example in the photo – FA 80.

And this is what the “sport shop” ski sticker looks like with more detailed information. What these indicators mean will be discussed below.

On Fischer 2019-2020 skis, the number is printed in the IFP platform area. It seems that the place was chosen specifically so that the number would be hidden when installing the fasteners with screws.

Fischer ski stiffness tables: soft, medium, stiff

Sizes and stiffness of fischer junior skis

Structures, diagrams and bases of Fischer skis for weather and route density

On the toe of the ski on the side of the sliding surface you can find two designations, for example: 28/1Q or 28/902 or A5/610. These designations contain information about the base of the glide and the design of the skis.

Fischer bases (sliding surfaces)

The skid surface markings can be found on the skid plate at the toe of the ski. The design is also marked there.

  • A5– a universal base for cold temperatures from t -5C and below. It is on skis marked Cold, the factory structure code is C1-1.
  • 28 – universal warm base at t -10C and above. Suitable for all types of snow, suitable for skis marked Plus. Since the 17/18 season it has become more universal: -10 and warmer, versus the old one from -2 and warmer. The factory structure code remains the same - P5-1.

Skis Speedmax, Carbonlite, RCS:

  • Worldcup 28 (Plus) – 10% graphite
  • Worldcup A5 (Cold) – 4.5% graphite

Skis RCR, SCS, CRS, SC:

  • Worldcup pro – 7.5% graphite
  • Protec – 7.5% graphite

Skis LS:

  • Sintec – 3.5% graphite

Diagrams of Fischer skis

Skate ski designs

  • 115 (15/11) – design for well-prepared and icy trails. The fulcrum points are located closer to the toe and heel of the ski. This arrangement increases the stability of the ski. Particularly relevant on an unprepared ice track and when equipment is deficient. Main disadvantages: “sticking” the ski and “burying” it in loose snow.
  • 610 (61Q, 1Q)– design for a well-prepared and soft track. The support points are brought closer to the block, which makes the toe and tail of the ski softer. This design allows the ski not to “stick” or bury itself in loose snow. Main disadvantages: “scouring” on an icy track due to lack of equipment.

Classic ski designs

  • 902 (90/9Q2)– design for soft and loose trails. Similar to skating 610/1Q, i.e. has soft toes and heels. The block is located lower than on the 812 and makes it easier to hold in difficult weather conditions. The main disadvantage: due to the low location of the holding area, the ointment will come off faster.
  • 90L– a variation of design 902. It has a higher arc, i.e. the block is raised higher. It is found on special order skis, and since 2018 it has been used in Speedmax Twin Skin skis (but the marking is still 9Q2).
  • 812 (81/8Q2)– universal classic design. The standard placement of the block retains the ointment longer, but requires more impulse to push through.

Structures on Fischer skis

The most common structures are P5-1 and C1-1. They, according to manufacturers, are the most popular at the World Cup.

Applying structure to skis is a delicate matter. To replicate the structure, there must be the same equipment, the same grinding stone, the same emulsion, etc. Real racing Fisher structures are rolled out only in Reed. Structures P5-1 (Plus or universal warm) and C1-1 (Cold or universal cold) are applied to the skis.

Below is a complete list of structures that are and have been used by Fischer. A similar list is floating around the Internet, but in this list we have corrected the temperature ranges as of the 17/18 season. If you have anything to add to this list, write in the comments.

Fischer structures

  • P10-1 for dry snow at temperatures below 0
  • C1-1 all types of snow, including fresh, temperature below -5
  • C3-1 for artificial snow, temperature below -5
  • C8-1 narrower structure for artificial snow from 0 to -10
  • C12-1 any type of snow, -5-15
  • C12-7 fine-grained snow at t from 0 to -10
  • P1-1 temperature +3 to -5, fresh snow
  • P3-1 structure for fresh wet snow, at 0 degrees with a transition to positive
  • P3-2 for old wet snow at t 0 with a transition to plus
  • Р3-3 watery snow, from +5 and above
  • Р5-0 dry fine snow from 0 to -5
  • P5-9 structure for classic skis on old wet snow, temperatures from 0 and above
  • TZ1-1 for fresh snow at temperatures below 0
  • P5-1 universal structure for temperatures from +5 to -10, any type of snow
  • P22-6 transitional structure for any type of snow, temperature from +5 to -5
  • P11-2 all types of snow from +2 to -8
  • P10-3 falling, fresh snow, t from 0 to -5
  • P9-2 wet snow, t above 0

Ramsau structures

Structures with index S are made in Ramsau. These skis can often be found on the secondary market. The most popular are S13.

  • S13-6 structure for rainy weather
  • S13-5-08 option for very wet fresh snow
  • S11-1 dry snow at t -10 -20
  • S12-1 fresh natural and artificial snow t 0 -15
  • S12-4 fresh dry snow t -5 -10
  • S12-2 fresh wet snow t 0 -5
  • S12-6 fresh falling wet snow t 0 -5
  • S12-12 old snow t 0 -5
  • S12-14 for frozen snow during the warming period, fresh snow, t -2 -10
  • S13-4 wet snow, natural and artificial, changeable weather, wide range
  • S13-5 fresh falling wet snow, t 0 with transition to plus
  • S13-5-08 wet fine-grained fresh snow
  • S11-3 structure for artificial snow, t -10 -20
  • S12-7 artificial snow, t -2 -12
  • S11-2 cold dry natural snow, t -10 -20
  • S12-16 structure for high humidity and fresh snow, suitable for gloss, t 0 -10
  • S12-2-07 for fresh snow and soft tracks 0 -10
  • S12-3 fresh snow at t -2 -6
  • S13-6 sleet, rain

Indicators FA, HR, SVZ: what is it and how to find out through the ski barcode

This marking is not found on all skis, but only on those specially selected for a professional or by pre-order. That is, at the “special workshop” or “sports workshop,” as our skiers like to call it. We wrote more about the existence of a special or sports workshop in the article.

If you have skis in front of you without a sticker, then these indicators can be easily recognized. Place any QR code scanner on your smartphone, launch it and read the barcode on your skis. The program will display something like 2.7 – 98.3, if such information does not come out, then try reading another barcode. For example, we got 2.7 – 98.3, that is, the HR of the ski is 2.7, the exact FA is 98.3. Don’t be surprised that the sticker may say FA 98 or even 97. Skis are not produced in pairs; they are assembled into pairs only later and such discrepancies are within the margin of error.

Skis for the 2019-2020 season come with a sticker of this type. It already has a QR code for reading all the information about the skis: barcode number, full ski number with size, HR and FA.

After reading, you get a number like this, where

  • 9002972387616 – barcode number
  • 186/1865078755 – number stamped on skis
  • 2.2 – HR
  • 90 – FA

  • HR- gap in millimeters, which remains after pressing the ski with half the weight of the average skier. The load is applied to the ski 7 cm below the balance point. The remaining gap is HR. Simply put, this is the stiffness of the tips and tails of the ski. For example, if you take skis with the same FA, but different HR, a ski with a larger HR will press more evenly, and a ski with a smaller HR will press down more evenly at first, but it will be more difficult to press down. With a large HR - a larger arc, a more arched ski; with a smaller HR - a smaller arc, the block is closer to the ski in the rolling phase. A low last is especially important for inexperienced skiers. In classics it will make it easier to hold, and in skates it will improve stability at the box office.
  • SVZ– a characteristic showing how much the ski differs from the ideal ratio of HR and FA. The value is used in production to check quality and select pairs of skis. When choosing a pair of skis for yourself, the indicator does not matter.
  • F.A.(hardness index) is the amount kilogram, which must be applied 7 cm below the balance point, to compress the ski to a gap of 0.2 millimeters.

Why FA and not a specific weight? The FA index is a characteristic of the ski, not the athlete. Using this parameter, a specialist can select skis for a specific athlete. The same ski can suit a 70 kg professional skier and a 90 kg amateur skier. At the same time, both will be comfortable and the skis will work as they should. It’s more difficult to select with FA than by kilograms, but if you figure it out, the selection of skis will be of better quality.

Fischer FA ski stiffness chart.

Variety of skate ski designs

Ski manufacturers use different technologies and diligently protect them from competitors with patents. In addition, they have different ideas about what the “ideal ski” is. This is good! Different winter conditions require different skis.

Amateur Advantage

Amateurs are not bound by contracts like professionals. No one will force you to be loyal to one company! It's simply unreasonable. After talking in the ski community, you can find out the purpose of current models from different companies. And make a clear choice. The professionals will envy you.

It happened when there was not a single “roller” out of the carload of pairs of the newest Fisher tested in the store. Unfortunately, it often happens that you don’t choose skis for specific winter conditions, but estimate what conditions a given pair can handle. And sometimes you don’t have enough imagination to come up with a purpose for some skis! Even the top model. They will never go! And next year you notice that the model has been replaced with a more understandable one, the conditions of use of which are instantly visible. But the name remains the same.
First-tier firms have unsuccessful models

One more observation

Modern ski technologies are sometimes assessed roughly, “by weight.” The lighter the ski, the better. However, the frosty design of the ski is a long rigid beam, which is, in principle, heavier than the short beam of a warm design made using the same technology. In the race for weight, manufacturers are beginning to “forget” about frosty skis. And they “remember” them only when they have mastered the technology very well. A couple of years after the start of its use. Therefore, looking for frost skis among old, used models is justified. The best model is not a “revolutionary” one, but one in which only the coloring of the skis for the new season has changed. Or just an insignificant hole appeared in the sock.

Skis from second-tier companies

Peltonen, Karhu, Trab, Kneissl are quite reputable brands, sometimes even leaders in local markets. These companies do not have large advertising budgets, but under these brands you can find very good skis with excellent sliding surface plastic (SP), the same as the top F, A, R, and at an attractive price. Take? Take! Only the top models of any year. But first, look carefully and feel. Should I buy skis from third-tier companies? No! You will find soft, cheap plastic, terrible lint on the joint, which can be cleaned out just when the ski has exhausted its short service life and is pressed through.

Cost optimization

It is not at all necessary to have top-level skis for every winter conditions. You need to understand when it is really necessary. Frost skis are impossible to find among the second models, unless they are Fisher RCS. Average frost skis determine the majority of your sporting results and it is correct if they are the best skis, but not necessarily the newest model. Warm (plus, water) skis are not demanding either on the smoothness of the diagram or on the quality of the plastic. In the spring you will have to run on warm skis on cones and ice. It is enough to choose the right stiffness and type of diagram.

If you weigh no more than 60 kg, you have additional options. You can buy cheaper skis for your weight, and there is a chance that you won’t wear out the last during the season. You may end up having to scrape unassuming plastic. At the same time you will apply the structure. (It is better to entrust a large warm structure to knurling. Otherwise, you can get stable “standing” skis.) As a last resort, pay attention to the top ski models Tis (owner Fisher), STS, Marpetti. This is already a real minefield. You will see what “screw skis”, “wave plastic”, “pile on end” means. Cheap skis are useful for everyone. The fact is that any cross-country skiing that claims to be fast is absolutely not designed for moving through deep snow or for laying ski tracks. They must be protected. Cheap skis will allow you to ski the slope without unnecessary worries. And it’s right to look for racing skis among one-year-old and older top models from Fisher, Atomic, Rossignol, Madshus, Salomon, Peltonen.

Optimization concerns poles, boots, and thermal underwear. Why do you need expensive super-hard poles on a soft amateur track? Yes, balance is important for poles, it is better with expensive poles, but it can also be good with cheap ones. Before purchasing ski boots, it is recommended to try them on. Why not try cheap ones, for example, Yaroslavl “Spine”? They might come! And you don't need a carbon cuff! Thermoplastic cuffs are enough!

Thermal underwear displayed in a large supermarket is essentially no different from the thermal underwear of prestigious brands. Yes, and it is made in the same factories. The antibacterial impregnation of expensive linen disappears after washing. Have you decided not to wash your clothes? (Great question! Yes and no mean the same thing.)

Marking skis can be useful at the pre-selection stage. This is where information about the purpose of models collected by other hobbyists will come in handy. With details, such as: brand, year of manufacture, warm/plus/cold, design, structure, additional information on the sports workshop sticker (if any), optimal conditions of use. However, the marking of skis, even sports workshop ones, does not fully reflect their properties. And the labeling of store-bought skis can only confuse. Let's start with the fact that completely different skis are produced under the same markings. Often different skis come in one pair! They are paired up based on just one parameter! The optimism of people buying skis via the Internet is incomprehensible to me.

Problems when choosing skis

Amateurs when choosing skis They do not have the opportunity to look at the diagram, and are forced to be content with indirect signs. Often the choice has to be made among “mongrel” skis, without design markings. First of all, you need to choose skis of your weight. There is an old successful pair at home - you need to remember its rigidity when squeezed with two hands and in the store not be distracted by skis that are not your stiffness. Then we separate the frost skis from the plus skis. These are two extremes in ski building, the difference is immediately visible. Frosty skis have long, smeared pressure humps, while warm skis have short ones. Many skis have a soft tip and tail, which shortens the length of the pressure humps, making the skis more prone to heat. There is no point in looking for very frosty skis among such skis.

The forward length of the block is an important parameter of the front hump of the diagram. For water skis, it is rather long, the hump is correspondingly short (if the toe is also soft), and therefore sharp. My Atomic WC FL 10/11 warm has a short last, but a long soft toe. The pressure hump is short. And my magnificent Rossignol X-ium S2 05/07 has a relatively short forward block, but the tip of the ski is hard - the front pressure hump is long, the skis are frosty (medium frosty in practice). We continue to press the skis with our hands, watching how the backs bend with a gradual increase in force. The positive ski quickly begins to bend close to the block. Graph type C. The rule has an exception - a pair with a BC diagram that is hard for you will also have short pressure humps, which may also turn out to be positive. A frosty ski bends more evenly from the rear ends to the edge of the last, similar to the closing of the halves of scissors. The toe and tail of skis should be hard in severe frost. The correct Fisher Hole 115 design is like this. These skis are at least moderately frosty.

Some experience is needed, which is acquired by manually comparing skis whose properties have been tested on snow. This comparison allows you to separate frosty skis from plus ones. However, using such a primitive method to separate moderately frosty skis from frosty skis is too difficult. It remains to add that finding frosty skis that suit your weight is a huge success.

Sliding surface

What kind of plastic is used on the joint venture? Slippery/non-slip? Low-pressure polyethylene (HDPE) and high-pressure polyethylene (LDPE) can be installed on the joint venture. Top skis always have PVD. It is sintered from powder under pressure. Such a joint venture is called sintered, synthesized. In juniors, PND is more often used. It is squeezed out of the melt through a slot - a die. The process is called extrusion. Polyethylenes are designated differently, for example P-TEX2000 (HDPE), P-TEX4000, Bi 5000 (LDPE). The higher the index of plastic (2000, 4000, 5000), the harder it is. However, it is more expensive and more difficult to process when making skis. It is easy to distinguish SP skis made from HDPE from skis with LDPE: the groove on the SP ski is cut out from HDPE, and the groove from LDPE is squeezed out. That is, in the groove of the LDPE SP there are no longitudinal traces of the cutting tool, its edges are flatter than on the HDPE SP. At first glance, the HDPE surface may look very attractive, it may be covered with a beautiful structure, but the groove will show everything. HDPE is more prone to lint formation during processing and holds lubricant less well. However, many owners of expensive skis do not suspect that their careless handling of the iron has long since melted the SP, and the LDPE in the surface layer has acquired the properties of HDPE. It's okay, they're driving. I have a pair of HDPE skis that glide great in certain weather conditions. The diagram is suitable for these conditions. And the diagram is the main thing!

There is plastic that is poorly wetted by paraffin; it is intended for above-zero temperatures and marathons, when any lubricant can only cause damage by collecting dirt or when there is no hope that the lubricant will last long enough. This kind of plastic is installed on Rossignol Zynex - the fourth model from the top. Good, durable skis.

About installing fasteners

The instructions recommend installing the bindings so that the axis of rotation of the boot coincides with the center of gravity of the ski. In my opinion, such a coincidence is not necessary. The balance line has little to do with the mechanical properties of the ski. A ski may have a soft tip, but a hard tail. How to distribute the skier's weight? Fisher has lightened the toe box of its Hole model while leaving the heel the same. And what about the balance? After all, it’s not just 5 grams, but 5 grams at the end of the ski! Maximum leverage. But what about the fact that the NNN bindings have an axis shifted relative to the toe of the boot by 10 mm, and the latest SNS RS-17 by as much as 17?! So, can they be installed in the same way as the old SNS? In Salomon boots, the Energizer cuff allows the skier to lean back, putting additional stress on the heel. This must be taken into account! Depending on the size of the boot, the fastening system... the installation of fastenings should differ. There is a problem related to balance: the directional stability of the ski. Instability can occur when pushing off and when sliding on one leg. When pushing off, the toe of the ski should not cling to the track more than the heel. And if the heel turns better than the toe, then the ski will also be unstable. Thus, if on dense On the track, the ski moves sideways (slips when pushed), then it is better to let this happen to the entire ski. The skier's thrusting efforts should not be large. The point of lateral balance is the point of equality of the moments of forces acting on the toe and heel of the ski during lateral repulsion, with zero steering by the foot, “caught” only experimentally. This is one of the beauties of the NIS platform. Easy to rearrange mounts. Lateral balance is important dense track. Especially the bumpy amateur one. And for hard “warm” skis with short pressure humps.

On a soft track, there may be a problem with the steepness of the front slopes of the pressure humps. The ski crushes the snow too quickly and slows down. Unfortunately, all this can only be felt during the process of running in the ski. Often, based on the results of running-in, it is necessary to rearrange the fasteners. Rearranging the bindings allows you to make the skis more stable, soft skis a little harder, and hard skis softer. However, the new binding installation point has nothing to do with the weight balance of the ski! He's just somewhere nearby. Modern skate bindings do not allow the ski to dangle freely around the axis of the boot; the position of the ski in the canopy is controlled by flexors or a spring, weight balance is unimportant!

Ski testing

The most accurate way to understand the purpose of skis is to test them on the ski track. A properly made ski should definitely perform in its own special winter conditions, maybe not in just one. And not just to go, but to go better than anyone else. It’s also good to narrow down the specialization of skis by applying the correct structure and choosing the location for installing the bindings. The diagram-structure-lubrication combination is rolling, we need to adjust all the components to each other. These skis are the slipperiest. There are no universal skis. There are poorly made skis that always perform mediocre. On universally poor sliding skis you have no chance of gaining the necessary technical skills. Often compare the glide of your skis in different conditions, identify their specialization.


Let's say all your skis are not suitable for the current weather, consider two options:

Ski settings

1. The weather is warmer than the skis are intended for.
2. Colder.

The range of skis (determined by the diagram) can be shifted to heat by knurling a large structure on top of the existing one.
You can move it to the cold by pressing or cycling the structure.

Lubrication also changes glide. Actually, by applying weather-appropriate lubricant to skis that are not suitable for the weather, you are already adjusting the skis. It is necessary to make allowances for how tightly the snow adheres to the ski when moving, and how porous it is for the water that forms. The fresher, less transformed the snow, the colder the structure needed. Smoother than it should be based on temperature alone. And old snow needs a warmer structure. Thus, fresh snow makes the sliding conditions seem colder, requiring a colder structure and lubrication.

Based on data on temperature and snow conditions, you can slightly adjust your skis to suit the weather. But you can’t turn warm skis into frosty skis!

Lately, everyone agrees that the glide of skis depends to the greatest extent on their diagram. And only then from the structure and lubrication. So why do amateurs think that they can get by with just one pair of skis, but at the same time buy many different waxes? Where is the logic?

Good luck with your choice at the start!


Review of the Fischer cross-country ski collection 2015

Series Race (racing/athlete) is represented by the following models: new for the season Fischer Speedmax Skate Cold Fisher Speedmax Skate Plus, Fischer Carbonlite Plus, Fischer Carbonlite Cold. These are professional skating models created for World Cup competitions and designed for world-class athletes. Ultra-light, ultra-fast skate skis with a World Cup profile for successful participation and victories in any race. Speedmax skis use the latest technology to connect the sliding surface to the base of the ski. The Speedmax core is baked separately and the sliding surface is glued on later in cold conditions. Thus, the crystal lattice of plastic molecules is not disturbed and this leads to an increase in the speed performance of the skis and unprecedented dynamics. Carbonlite models use HM carbon to reduce toe weight. It reduces the weight and vibration of the ski during take-off, which reduces energy loss and provides more even strides when skating. The price range for the racing series is 22,000 - 25,000 rubles. Series Sport (Expert/Amateur/Fitness) presented by RCS Skate ( Plus And Cold), RCR Skate, SCS Skate, CRS Skate, SC Skate NIS. This is a line of excellent skating skis for professionals and amateur athletes who spend a lot of time on the slopes. The skis are made using the latest technology and are designed for advanced athletes. These models have a high-molecular plastic sliding surface, inherited from older models, but with a universal structure that allows the ski to ride well in various weather conditions. The exception is the RCS Skate model, which is divided into Plus and Cold. The main difference between these skis is the different use of materials in the structure of their cores, which affects the nature of the last and the weight of the pair itself. The series borrows the geometry and design of racing models, which makes the skis controllable and very fast. It is worth recalling that Fischer is a world leader in the production of racing skis. It is the skis of this manufacturer that have won the largest number of prizes at the most prestigious competitions in the world. Price range for the expert series of skis is 7,600 - 14,300 rubles.

Review of the Fischer cross-country ski collection 2014

Speedmax And Carbonlite - Cross-country skis of these series are the most high-tech and advanced in the Fischer line. The strongest athletes compete on these skis at World Cup level competitions. Skis in these series are made using carbon fibers to lighten the weight and increase the strength of the ski. The Carbonlite is the lightest ski in the Fischer line - only 980g. The main difference between Fischer Speedmax and Carbonlite cross-country skis is the “cold” bonding of the sliding surface to the ski. Carbonlite skis are glued together entirely in an oven at a temperature of 100-120 degrees Celsius. Speedmax is kiln-bonded in exactly the same way, but without the sliding surface. The slipper is glued to the ski last at room temperature. This way, the pores of the plastic are not damaged by high temperatures, and this allows the wax to last longer than on regular skis. Carbonlite is available for skating and classic. Plus models – for temperatures -5 and above. Cold models for temperatures -5 and below. Speedmax is available only for skating and for temperatures -5 and above. Speedmax weight - 1030 g. Carbonlite weight - 980 g.

R.C.S. – professional skis for skating. The tip and tail of the ski are made from ultra-light laminates to reduce weight and reduce vibration. The core is made of honeycomb materials, in which 80% of the internal volume is air. Optimal torsional rigidity and fracture toughness. Models available for classic and skating. For warm and cold temperatures. RCS weight - 1080 g.

RCR Skate - Skating model for competitions and training. The professional sliding surface and the DTG World Cup Universal treatment ensure excellent gliding in all weather conditions. A new generation of cores made with the addition of volcanic basalt fibers, which reduces the weight of the skis and provides excellent elasticity in all weather conditions. Weight of RCR Skate - 1190 g.

SCS Skate – skating skis for amateur athletes. The volcanic basalt fiber core makes the ski lightweight and flexible in all weather conditions. Special inserts on the heel of the skis strengthen the structure and increase the service life of the skis. SCS Skate weight - 1270 g.

CRS – Fischer cross-country skis for amateur athletes. The core is a combination of Air Core and air channels in a wood core structure. Volcanic basalt fibers reduce weight and maintain performance. The new universal structure ensures the best gliding in all weather conditions. Available for skate and classic. SCR weight - 1350 g.

S.C. – skis are suitable for amateur athletes. Lightweight core and WC Pro sliding surface. Special edge reinforcement guarantees ski durability and excellent torsional rigidity. Special inserts on the heel of the skis strengthen the structure and increase the service life of the skis. Skate, classic and Combi skis are available. SC weight - 1380 g.

L.S. – Fischer cross-country skis for active enthusiasts. A slipper with a universal structure for all weather conditions. Lightweight wooden core with special air channels. Available in classic models with ointment and ointment-free grip. Weight LS - 1410 g

Sporty crown And Spirit crown my style – men's and women's skis for lovers of classic style skiing. The skis provide excellent glide thanks to the universal Sin Tec sliding surface and reliable grip thanks to the Premium Crown notches.

When you look at the ski collection of a popular brand, your eyes literally run wild: at least three dozen models only for adults! And choosing “your” pair can be difficult even for an experienced skier, let alone a beginner. The characteristics of alpine skis, which each manufacturer publishes both on the website and in the catalog, will help you choose “your skis” among all the variety, or at least reduce the number of options.

So, let's read the catalogue.

Parameters of specific alpine skis can be found not only in catalogs, but also on the skis themselves. Marking of alpine skis is optional, and many manufacturers indicate only the name and size, but more often the following are indicated on each ski:

    alpine ski geometry, for example, 120/73/103 mm; size of a specific pair, for example, 165 cm; cutout radius - designated R=12 m; article number, for example, L37786500; name of the manufacturing company.

In addition, the names of technologies, designs, materials can be indicated (WoodCore, Titanal...), and in the case of asymmetrical skis (these are produced, for example, by the Elan company), the inscriptions Left and Right, so as not to confuse the skis when fastening them into the bindings.

Alpine ski width

Alpine ski width measured in millimeters. The waist width of alpine skis is one of the key characteristics that determines the all-terrain qualities of skis. A waist width of up to 73 mm is typical for models for skiing on prepared slopes. The narrower the waist, the faster the ski can move from turn to turn and change the direction of sliding on a hard slope. Waist widths ranging from 73‑75 mm to 85‑90 mm are the most versatile models (all-mountain) for skiing on prepared slopes, broken snow, and shallow virgin soil. The wider the waist, the better the ski floats in deep snow. Accordingly, skis with a waist wider than 90 mm are chosen by those who have almost no plans to ski on prepared slopes.

Ski geometry

The geometry of alpine skis is given in catalogs in the form of numbers, for example, 120/73/103 mm, next to which is the length of the skis - the size for which the geometry is given. The wider the toe in relation to the width of the waist, the more willing the ski begins to turn. And the narrower the heel, the easier the ski goes into sliding. In other words, a ski with 125/73/97mm geometry will dive into a turn faster, and it will be easier to drop your heels on such skis than a ski with 120/73/103mm geometry. Heel drop is a slang expression. This is a technique that is used to stop or change the direction of movement in the event of an unexpected obstacle - for example, a skier who has fallen in front of you. In this situation, the most natural movement is to place the skis across the slope, for which, with the force of the legs, the skis are released into slipping - they begin to slide sideways, and the heels of the ski slide more than the toes.

Ski radius

The radius of alpine skis, or more precisely, the radius of the side cut, simply “radius”, and sometimes you can also find “arc radius”, measured in meters. A characteristic that determines how sharp the turns will be, which are easiest to perform on such a ski. The smaller the cutout radius (11-13 m), the more the ski is tuned to frequent and fast turns; the larger this parameter is (17... m), the more prone such a ski will be to smooth turns. Of course, an experienced skier will be able to “drive” a ski with a large radius into a short arc, and on skis with a large cutout - that is, with a small cutout radius - he will travel in a long arc. But this will require a little more strength and skill. This means that the pleasure from riding will be somewhat less.

When it comes to the radius of the cut, you need to keep in mind that this is not an exact geometric characteristic, since the shape of the cut is not a circular arc for any ski model. Parabola, ellipse, multi-radius cutout - whatever. In short, the radius of the cut is a number that shows what radius of turns the ski will perform most willingly, without forcing the skier to exert additional effort.

Ski weight

This is not the most important characteristic when choosing. The weight of alpine skis is more often of interest to women. Fans of ski touring are an exception; they have to walk a lot up the mountain, carrying skis on their shoulders, or walk uphill wearing skis - special tapes with pile, thanks to which the skis glide only forward. In all other cases, trust the ski developers: the weight of each model is balanced precisely so that we get maximum pleasure from skiing. After all, the lighter the ski, the easier it is to control, but at the same time it will be less stable in the direction set by the skier, and it will be easier to knock it off course. This is useful for beginners - after all, skiing speed is still low, but you learn faster on skis that are easy to control. And as experience increases, skiing speed also increases; more and more stable skis with predictable behavior are required even on uneven snow - and the skis become a little heavier.

However, the question “How much do alpine skis weigh?” often interests skiers before purchasing air tickets. Women's skis are shorter and lighter, they have lighter bindings, so their weight is around 4.5-5.5 kg/pair; men's skis are longer, more powerful and heavier, their weight is from 5 to 7 kg; you can also find heavier models, especially for high-speed freeride. Skis for ski touring are much lighter; special bindings are installed on them, so the weight of a pair of such specialized skis can be less than 2 kg.

Ski stiffness/gain

But you won’t find such a parameter in catalogs, although many people talk about it. The fact is that the stiffness of skis is not standardized in any units, and you can only compare two models in terms of stiffness with your own hands. In general, we can say that within the same line of skis, models for more experienced skiers are stiffer, but you will have to compare them with models from other manufacturers either “manually” or by studying the design of the skis - how many layers of metal are in each of them, what the core is made of and so on. The more layers of metal, the stiffer the ski, the wider the ski, the stiffer it is with the same design, and so on. There are many factors, and not all of them are described in the catalog. And the distribution of stiffness for different skis can be different - some models are characterized by uniform stiffness along the entire length, as a rule, these are models for prepared slopes, while others (universal models and skis for freeride - off-piste skiing) have a softer toe and heel, and the middle part is noticeably stiffer.

So far we have only talked about longitudinal rigidity. It should be remembered that there is another parameter that is also not standardized and is not even indicated in catalogs - this is torsional rigidity. This characteristic determines how much the tip and tail of the ski resist torsion and, accordingly, how tenaciously the skis grip the slope with its edges in these zones. This characteristic is determined by the design of the skis. You can at least find out about the stiffness of skis in advance by looking in the Reinforcement column.

The most powerful reinforcement is the layers of metal located below and above the core, or only below. Skis with two layers of metal will almost always be stiffer than models in which one layer of metal is replaced with lightweight fiberglass or carbon.

Rocker

Rocker is a reverse camber - a rise in the toe area of ​​the ski, starting to a greater or lesser extent closer to the bindings. Its length largely depends on the purpose of the ski. Here are the options for combining camber and rocker in various models used by one of the largest manufacturers:

The rocker has several goals at once. First of all, moderate rocker in all-mountain models - the skis that are most widely used - makes it easier to start a turn. This is due to the fact that the effective edge length of an edged ski becomes shorter, which makes the ski feel shorter and turn easier. In addition, skis with this toe design glide much softer on uneven slopes: the raised toe “swallows” lumps and floats up onto the bumps more smoothly. Such skis handle better in soft and wet snow, while being quite stable and appealing to lovers of soft carving and even those skiers who like aggressive arcs. And even fairly aggressive carving enthusiasts will get their own “bonus”: on skis with rocker, much less force is spent on cutting arcs. And in soft, deep snow, skis with rocker float up at a much lower speed, this saves the skier from having to “sit in the back stance.”

Ski speed

You won’t find such a thing as “alpine ski speed” in catalogs. It can only slip in comparison with other models of the same line. As with flex, within the same ski line, models for more experienced skiers are designed for higher speeds. In addition, in the case of speed, the radius of the cutout also plays a role. As already mentioned, the larger the radius of the cut, the more prone the ski is to smooth turns, and these are the turns that are used at high speed.

That is alpine skiing for high speed they are distinguished by greater rigidity, a larger cut radius and... greater length - after all, the longer the ski, the more stable it is, and stability at high speed is very important. And one more note, no longer related to speed: if your weight is more than normal, then choose skis a step or two higher than recommended - they will be stiffer, which means they will be better suited to your weight.

Fastenings

As a rule, the characteristics of skis also indicate the type of interface - the platform on which the bindings are installed, and the model of the bindings. At the same time, the fastening model contains numbers - for example, 12. They indicate the upper value of the DIN actuation force range. The most common bindings are with scales of 3‑10, 4‑12 and 5-14; accordingly, the name of the ski will contain the number 10, 12 or 14.

It happens that the same ski model is equipped with bindings of different power. More powerful mounts are always more expensive. Determining which fasteners you need is easy. Divide your weight by 10, the resulting value should be closer to the middle of the binding range. For example, if your actuation force is “6”, mounts with a scale from 3 to 10 are perfect for you; if “8-9”, then mounts with a scale of up to 12. More powerful mounts are used by athletes or heavy riders.